FormuMax提供藥物遞送(drug delivery)之產品相關服務，其具有世界一流的專業技術，特別注重對脂質體(liposomes)技術與藥物遞送的技術研究。其公司位於加州，為了滿足製藥及生物科技產業中藥物遞送之需求，FormuMax提供各式各樣的藥物遞送方式，如傳統之liposomes、stealth (PEGylated) liposomes、slow release liposomes或增進藥物可溶性之microemulsion等，期望能成為藥物遞送的領導者。FormuMax暢銷產品包含Clophosome、Doxoves、其他drug loaded liposomes及cationic liposomes、fluorescent liposomes等。
產品清單
| Catalogue number | Name | Volumn (mL) | Description |
| F90101TH-05 | Trans-Hi™ – In vitro Transfection Reagent | 0.5 | Product type: In vitro cell transfection reagent |
| Applications Plasmid transfection, protein overexpression | |||
| Technique: Polymer-based DNA nanoparticles | |||
| Cell type: Established cell lines, primary cells, hard-to-transfect cells, Adherent cells and suspension cells | |||
| ample type: Plasmid DNA | |||
| Serum compatibility: Yes | |||
| Product size: 0.5, 1.0 and 10×1.0 mL | |||
| Number of transfections Up to 660 in 24-well plates with 1.0mL reagent up to 330 transfections in 6-well plates | |||
| Shelf-life: 12 months or longer when store refrigerated (2-8°C) | |||
| Shipping condition: Room temperature | |||
| F90101TH-10 | Trans-Hi™ – In vitro Transfection Reagent | 1.0 | Product type: In vitro cell transfection reagent |
| Applications Plasmid transfection, protein overexpression | |||
| Technique: Polymer-based DNA nanoparticles | |||
| Cell type: Established cell lines, primary cells, hard-to-transfect cells, Adherent cells and suspension cells | |||
| ample type: Plasmid DNA | |||
| Serum compatibility: Yes | |||
| Product size: 0.5, 1.0 and 10×1.0 mL | |||
| Number of transfections Up to 660 in 24-well plates with 1.0mL reagent up to 330 transfections in 6-well plates | |||
| Shelf-life: 12 months or longer when store refrigerated (2-8°C) | |||
| Shipping condition: Room temperature | |||
| F90101TH-101 | Trans-Hi™ – In vitro Transfection Reagent | 10 x 1.0mL | Product type: In vitro cell transfection reagent |
| Applications Plasmid transfection, protein overexpression | |||
| Technique: Polymer-based DNA nanoparticles | |||
| Cell type: Established cell lines, primary cells, hard-to-transfect cells, Adherent cells and suspension cells | |||
| ample type: Plasmid DNA | |||
| Serum compatibility: Yes | |||
| Product size: 0.5, 1.0 and 10×1.0 mL | |||
| Number of transfections Up to 660 in 24-well plates with 1.0mL reagent up to 330 transfections in 6-well plates | |||
| Shelf-life: 12 months or longer when store refrigerated (2-8°C) | |||
| Shipping condition: Room temperature | |||
| F10102 | Plain DPPC/CHOL Liposomes (55:45 mol/mol, 100 nm, 60mM) | 10 | Plain DPPC/CHOL Liposomes (55:45 mol/mol, 100 nm, 60mM) |
| Lipid composition: DPPC/CHOL (55:45 mol/mol) | |||
| Mean particle size: 100 nm (95 – 120 nm) | |||
| Lipid concentration: 60 mM (60 -65 mM) | |||
| Internal/External solution: 10% sucrose, 20 mM HEPES, pH 7.0 – 7.5 | |||
| F10103 | Plain DSPC/CHOL Liposomes (55:45 mol/mol, 100 nm, 60mM) | 10 | Plain DSPC/CHOL liposomes (55:45 mol/mol, 100 nm) |
| Lipid composition: DSPC/CHOL (55:45 mol/mol) | |||
| Mean particle size: 100 nm (95 – 120 nm) | |||
| Lipid concentration: 60 mM (60-65 mM) | |||
| Internal/External solution: 10% sucrose, 20 mM HEPES, pH 7.0 – 7.5 | |||
| F10104 | Plain HSPC/CHOL Liposomes (55:45 mol/mol, 100 nm,60mM) | 10 | Plain HSPC/CHOL liposomes (55:45 mol/mol, 100 nm) |
| Product code: F10104 | |||
| Lipid composition: HSPC/CHOL (55:45 mol/mol) | |||
| Mean particle size: 100 nm (95 – 120 nm) | |||
| Lipid concentration: 60 mM (60 -65 mM) | |||
| Internal/External solution: 10% sucrose, 20 mM HEPES, pH 7.0 – 7.5 | |||
| F10105 | Plain 20:0PC/CHOL Liposomes (55:45 mol/mol, 100 nm, 60mM) | 10 | Plain 20:0PPC/CHOL liposomes (55:45 mol/mol, 100 nm) |
| Lipid composition: 20:0PC/CHOL (55:45 mol/mol) | |||
| Mean particle size: 110 nm (100-130 nm) | |||
| Lipid concentration: 60 mM (60 -65 mM) | |||
| Internal/External solution: 10% sucrose, 20 mM HEPES, pH 7.0 – 7.5 | |||
| F10109 | Plain Pure DOPC Liposomes (100 nm, 60mM) | 10 | Plain DOPC liposomes (100%, 100 nm) |
| Lipid composition: DOPC | |||
| Mean particle size: 100 nm (90-120 nm) | |||
| Lipid concentration: 60 mM (60 -65 mM) | |||
| Internal/External solution: 10% sucrose, 20 mM HEPES, pH 7.0-7.5 | |||
| F10110 | Plain Pure POPC Liposomes (100 nm, 60mM) | 10 | Plain POPC liposomes (100%, 100 nm) |
| Lipid composition: POPC | |||
| Mean particle size: 100 nm (90-120 nm) | |||
| Lipid concentration: 60 mM (60 -65 mM) | |||
| Internal/External solution: 10% sucrose, 20 mM HEPES, pH 7.0-7.5 | |||
| F10202 | Plain DPPC/CHOL/mPEG2000-DSPE Liposomes (50:45:5 mol/mol, 100 nm, 60mM) | 10 | Plain DPPC/CHOL/mPEG2000-DSPE liposomes (100 nm) |
| Lipid composition: DPPC/CHOL/mPEG2000-DSPE (50:45:5 mol/mol) | |||
| Mean particle size: 100 nm (95 – 120 nm) | |||
| Lipid concentration: 60 mM (60 -65 mM) | |||
| Internal/External solution: 10% sucrose, 20 mM HEPES, pH 7.0-7.5 | |||
| F10203 | Plain DSPC/CHOL/mPEG2000-DSPE Liposomes (50:45:5 mol/mol, 100 nm, 60mM) | 10 | Preformed Plain DSPC/CHOL/mPEG2000-DSPE liposomes (100 nm) |
| Lipid composition: DSPC/CHOL/mPEG2000-DSPE (50:45:5 mol/mol) | |||
| Mean particle size: 100 nm (95 – 120 nm) | |||
| Lipid concentration: 60 mM (60 -65 mM) | |||
| Internal/External solution: 10% sucrose, 20 mM HEPES, pH 7.0-7.5 | |||
| F10204 | Plain HSPC/CHOL/mPEG2000-DSPE Liposomes (50:45:5 mol/mol, 100 nm, 60mM) | 10 | Plain HSPC/CHOL/mPEG2000-DSPE liposomes (100 nm) |
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (50:45:5 mol/mol) | |||
| Mean particle size: 100 nm (95 – 120 nm) | |||
| Lipid concentration: 60 mM (60 -65 mM) | |||
| Internal/External solution: 10% sucrose, 20 mM HEPES, pH 7.0 – 7.5, | |||
| F10205 | Plain 20:0PC/CHOL/mPEG2000-DSPE Liposomes (50:45:5 mol/mol, 100 nm, 60mM) | 10 | Plain 20:0PC/CHOL/mPEG2000-DSPE liposomes (110 nm) |
| Lipid composition: 20:0PC/CHOL/mPEG2000-DSPE (50:45:5 mol/mol) | |||
| Mean particle size: 110 nm (100 – 130 nm) | |||
| Lipid concentration: 60 mM (60 -65 mM) | |||
| Internal/External solution: 10% sucrose, 20 mM HEPES, pH 7.0 – 7.5 | |||
| F20103A | DSPC/CHOL (55:45 mol/mol) Liposomes with Ammonium Gradient (100nm) | 10 | DSPC/CHOL (55:45 mol/mol) Liposomes with Ammonium Gradient (100nm) |
| Lipid composition: DSPC/CHOL (55:45 mol/mol) | |||
| Mean particle size: 100 nm (95 – 120 nm) | |||
| Lipid concentration: 60 mM (60 – 70 mM) | |||
| Hydration buffer (loading battery): 250 mM ammonium sulfate | |||
| External solution: 10% sucrose, 20mM NaPO4, pH 6.5 ± 0.2 | |||
| F20104A | HSPC/CHOL (55:45 mol/mol) Liposomes with Ammonium Gradient (100nm) | 10 | HSPC/CHOL (55:45 mol/mol) Liposomes with Ammonium Gradient (100nm) |
| Lipid composition: HSPC/CHOL (55:45 mol/mol) | |||
| Mean particle size: 100 nm (95 – 120 nm) | |||
| Lipid concentration: 60 mM (60 – 70 mM) | |||
| Hydration buffer (loading battery): 250 mM ammonium sulfate | |||
| External solution: 10% sucrose, 20mM NaPO4, pH 6.5 ± 0.2 | |||
| F20203A | DSPC/CHOL/mPEG-DSPE (50:45:5 mol/mol) Liposomes with Ammonium Gradient (100nm) | 10 | DSPC/CHOL/mPEG2000-DSPE (50:45:5 mol/mol) Liposomes with Ammonium Sulfate Gradient (100nm) |
| Lipid composition: DSPC/CHOL/mPEG2000-DSPE (50:45:5 mol/mol) | |||
| Mean particle size: 100 nm (95 – 120 nm) | |||
| Lipid concentration: 60mM (60 – 65 mM) | |||
| Hydration buffer (loading battery): 250 mM ammonium sulfate | |||
| External solution: 10% sucrose, 20mM NaPO4, pH 6.5 ± 0.2 | |||
| F20204A | HSPC/CHOL/mPEG2000-DSPE (50:45:5 mol/mol) Liposomes with Ammonium Gradient (100nm) | 10 | PEGylated HSPC/CHOL/mPEG2000-DSPE (50:45:5 mol/mol) Liposomes with Ammonium Sulfate Gradient (100nm) |
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (50:45:5 mol/mol) | |||
| Mean particle size: 100 nm (95 – 120 nm) | |||
| Lipid concentration: 60 mM(60 – 65 mM) | |||
| Hydration buffer (loading battery): 250 mM ammonium sulfate | |||
| External solution: 10% sucrose, 20mM NaPO4, pH 6.5 ± 0.2 | |||
| F20204AB | HSPC/CHOL/mPEG2000-DSPE (56.2/38.5/5.3) Liposomes with Ammonium Gradient (100nm) | 10 | HSPC/CHOL/mPEG2000-DSPE (56.2:38.5:5.3) Liposomes with Ammonium Gradient Sulfate (100nm) |
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (56.2:38.5:5.3 mol/mol) | |||
| Mean particle size: 100 nm (95 – 120 nm) | |||
| Lipid concentration: 60 (60 -70mM) | |||
| Hydration buffer (loading battery): 250 mM ammonium sulfate | |||
| External solution: 10% sucrose, 20mM NaPO4, pH 6.5 ± 0.2 | |||
| F20204AS | SUV HSPC/CHOL/mPEG2000-DSPE (56.2/38.5/5.3) Liposomes with Ammonium Gradient (80 nm) | 10 | SUV HSPC/CHOL/mPEG2000-DSPE (56.2/38.5/5.3) Liposomes with Ammonium Sulfate Gradient (85 nm) |
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (56.2:38.5:5.3 mol/mol) | |||
| Mean particle size: 85 nm (80 – 90nm) | |||
| Lipid concentration: 60mM (60 – 70 mM) | |||
| Hydration buffer (loading battery): 250 mM ammonium sulfate | |||
| External solution: 10% sucrose, 20mM NaPO4, pH 6.5 ± 0.2 | |||
| F30204B-D2-2 | Doxoves® – STEALTH Liposomal Doxorubicin HCl (2.0mg/mL) | 2 | Doxoves® – PEGylated Liposomal Doxorubicin HCl (2.0mg/mL) |
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (56.2:38.5:5.3 mol/mol) | |||
| Lipid concentration: 20.0 mM | |||
| Doxorubicin HCl: 2.0 mg/mL | |||
| Encapsulation efficiency: > 95% (typically 98%) | |||
| Loading battery: 250 mM ammonium sulfate | |||
| Mean particle size: 85 nm (80 – 90 nm) | |||
| External solution: 10% sucrose, 10 mM histidine, pH 6.5 | |||
| Shelf-life: 6 months, storage: 2-8 degree C | |||
| F30204B-D2-10 | Doxoves® – STEALTH Liposomal Doxorubicin HCl (2.0mg/mL) | 10 | Doxoves® – PEGylated Liposomal Doxorubicin HCl (2.0mg/mL) |
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (56.2:38.5:5.3 mol/mol) | |||
| Lipid concentration: 20.0 mM | |||
| Doxorubicin HCl: 2.0 mg/mL | |||
| Encapsulation efficiency: > 95% (typically 98%) | |||
| Loading battery: 250 mM ammonium sulfate | |||
| Mean particle size: 85 nm (80 – 90 nm) | |||
| External solution: 10% sucrose, 10 mM histidine, pH 6.5 | |||
| Shelf-life: 6 months, storage: 2-8 degree C | |||
| F30204B-C2-2 | Control liposomes for Doxoves® (20mM) | 2 | Plain Control Liposomes for Doxoves® |
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (56.2:38.5:5.3 mol/mol) | |||
| Lipid concentration: 20 mM | |||
| Dox HCl concentration: none | |||
| Loading battery: 250 mM ammonium sulfate | |||
| Mean particle size: 85 nm (80-90 nm) | |||
| External solution: 10% sucrose, 10 mM histidine, pH 6.0 – 6.5 | |||
| Storage and Stability: stable for 6 months when stored in refrigerator (2-8 degree C) | |||
| F30204B-C2-10 | Control liposomes for Doxoves® (20mM) | 10 | Plain Control Liposomes for Doxoves® |
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (56.2:38.5:5.3 mol/mol) | |||
| Lipid concentration: 20 mM | |||
| Dox HCl concentration: none | |||
| Loading battery: 250 mM ammonium sulfate | |||
| Mean particle size: 85 nm (80-90 nm) | |||
| External solution: 10% sucrose, 10 mM histidine, pH 6.0 – 6.5 | |||
| Storage and Stability: stable for 6 months when stored in refrigerator (2-8 degree C) | |||
| F30204C-D2-2 | Combo kit of Doxoves® (2.0mg/mL) Control liposomes for Doxoves® (20mM) | 2 | Combo Kit of Doxoves® (2.0mg/mL) And The Plain Control Liposomes (20mM) |
| For your convenience, this combo kit composed of one vial of Doxoves® (F30204B-D2) and one vial of the plain ammonium sulfate control liposomes (F30204B-C2) at a discount. | |||
| F30204C-D2-10 | Combo kit of Doxoves® (2.0mg/mL) Control liposomes for Doxoves® (20mM) | 10 | Combo Kit of Doxoves® (2.0mg/mL) And The Plain Control Liposomes (20mM) |
| For your convenience, this combo kit composed of one vial of Doxoves® (F30204B-D2) and one vial of the plain ammonium sulfate control liposomes (F30204B-C2) at a discount. | |||
| F30204B-D-2 | Doxoves® – STEALTH Liposomal Doxorubicin HCl (4.0mg/mL) | 2 | Doxoves® – PEGylated Liposomal Doxorubicin HCl |
| Doxorubicin HCl is loaded into PEGylated liposomes composed of HSPC/CHOL/mPEG2000-DSPE (56.2:38.5:5.3 mol/mol) with ammonium gradient by the active loading approach. It is comparable to the commercial product DOXIL®. | |||
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (56.2:38.5:5.3 mol/mol) | |||
| Lipid concentration: 40.0 mM | |||
| Doxorubicin HCl: 4.0 mg/mL | |||
| Encapsulation efficiency: > 95% (typically 98%) | |||
| Loading battery: 250 mM ammonium sulfate | |||
| Mean particle size: 85 nm (80 – 90 nm) | |||
| External solution: 10% sucrose, 10 mM histidine, pH 6.5 | |||
| Shelf-life: 6 months, storage: 2-8 degree C | |||
| F30204B-D-10 | Doxoves® – STEALTH Liposomal Doxorubicin HCl (4.0mg/mL) | 10 | Doxoves® – PEGylated Liposomal Doxorubicin HCl |
| Doxorubicin HCl is loaded into PEGylated liposomes composed of HSPC/CHOL/mPEG2000-DSPE (56.2:38.5:5.3 mol/mol) with ammonium gradient by the active loading approach. It is comparable to the commercial product DOXIL®. | |||
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (56.2:38.5:5.3 mol/mol) | |||
| Lipid concentration: 40.0 mM | |||
| Doxorubicin HCl: 4.0 mg/mL | |||
| Encapsulation efficiency: > 95% (typically 98%) | |||
| Loading battery: 250 mM ammonium sulfate | |||
| Mean particle size: 85 nm (80 – 90 nm) | |||
| External solution: 10% sucrose, 10 mM histidine, pH 6.5 | |||
| Shelf-life: 6 months, storage: 2-8 degree C | |||
| F30204C-D-2 | Combo kit of Doxoves® and plain control liposomes | 2 | Combo Kit of Doxoves® And Plain Control Liposomes |
| This combo kit composed of one vial of Doxoves® (F30204B-D) and one vial of the plain ammonium sulfate control liposomes (F30204B-C) | |||
| F30204C-D-10 | Combo kit of Doxoves® and plain control liposomes | 10 | Combo Kit of Doxoves® And Plain Control Liposomes |
| This combo kit composed of one vial of Doxoves® (F30204B-D) and one vial of the plain ammonium sulfate control liposomes (F30204B-C) | |||
| F30204B-C-2 | Control liposomes for Doxoves® (40mM) | 2 | Plain Control Liposomes for Doxoves® |
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (56.2:38.5:5.3 mol/mol) | |||
| Lipid concentration: 40 mM | |||
| Dox HCl concentration: none | |||
| Loading battery: 250 mM ammonium sulfate | |||
| Mean particle size: 85 nm (80-90 nm) | |||
| External solution: 10% sucrose, 10 mM histidine, pH 6.0 – 6.5 | |||
| Storage and Stability: stable for 6 months when stored in refrigerator (2-8 degree C) | |||
| F30204B-C-10 | Control liposomes for Doxoves® (40mM) | 10 | Plain Control Liposomes for Doxoves® |
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (56.2:38.5:5.3 mol/mol) | |||
| Lipid concentration: 40 mM | |||
| Dox HCl concentration: none | |||
| Loading battery: 250 mM ammonium sulfate | |||
| Mean particle size: 85 nm (80-90 nm) | |||
| External solution: 10% sucrose, 10 mM histidine, pH 6.0 – 6.5 | |||
| Storage and Stability: stable for 6 months when stored in refrigerator (2-8 degree C) | |||
| F30204-IT-2 | STEALTH Liposomal Irinotecan HCl (2.0mg/mL, 80-100nm) | 2 | PEGylated Liposomal Irinotecan HCl |
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (50:45:5 mol/mol) | |||
| Lipid concentration: 20.0 mM | |||
| Iroinotecan HCl: 2.0 mg/mL | |||
| Encapsulation efficiency: > 95% (typically 98%) | |||
| Loading battery: 250 mM ammonium sulfate | |||
| Mean particle size: 100 nm (80-110 nm) | |||
| External solution: 10% sucrose, 20 mM HEPES, pH 7.0 | |||
| Shelf-life: 3 months, storage: 2-8 degree C | |||
| F30204-TT-2 | STEALTH Liposomal Topotecan HCl (2.0mg/mL, 80-100nm) | 2 | PEGylated Liposomal Topotecan HCl |
| Lipid composition: HSPC/CHOL/mPEG2000-DSPE (50:45:5 mol/mol) | |||
| Lipid concentration: 20.0 mM | |||
| Topotecan HCl: 2.0 mg/mL | |||
| Encapsulation efficiency: > 95% | |||
| Loading battery: 250 mM ammonium sulfate | |||
| Mean particle size: 100 nm (80-110 nm) | |||
| External solution: 10% sucrose, 20 Mm HEPES, pH 7.0 | |||
| Shelf-life: 3 months, storage: 2-8 degree C | |||
| FB30020 | Dilution Buffer for Doxoves® | 20 | Dilution Buffer for Doxoves® |
| This buffer dilution is made to match the bulk solution for most liposome encapsulated doxorubicin, Doxoves® | |||
| Composition: 10% sucrose, 10 mM histidine, pH 6.5 ± 0.2 | |||
| Volume: 50 mL | |||
| Storage: sterile filtered (0.2µm), store at 2-8 degree C | |||
| Shelf-life: 6 months stored in refrigerator | |||
| F50101 | Cationic Liposomes DMTAP/DOPE | 2 | DMTAP/DOPE Cationic Liposomes |
| Lipid composition: DMTAP/DOPE (50:50 mol/mol) | |||
| Mean particle size: 80-100 nm | |||
| Lipid concentration: 5 mM (3.5 mg/mL) | |||
| Bulk solution: DEPC water, 10% Ethanol | |||
| F50102 | Cationic Liposomes DOTAP/DOPE | 2 | DOTAP/DOPE Cationic Liposomes |
| Lipid composition: DOTAP/DOPE (50:50 mol/mol) | |||
| Mean particle size: 80-100 nm | |||
| Lipid concentration: 5 mM (3.61 mg/mL) | |||
| Bulk solution: DEPC water, 10% Ethanol | |||
| F50103 | Cationic Liposomes DDAB/DOPE | 2 | DDAB/DOPE Cationic Liposomes |
| Lipid composition: DDAB/DOPE (50:50 mol/mol) | |||
| Mean particle size: 80-100 nm | |||
| Lipid concentration: 5 mM (3.44 mg/mL) | |||
| Bulk solution: DEPC water, 10vol% ethanol | |||
| F50104 | Cationic Liposomes DODAP/DOPE | 2 | DODAP/DOPE Cationic Liposomes |
| Lipid composition: DODAP/DOPE (50:50 mol/mol) | |||
| Mean particle size: 80-100 nm | |||
| Lipid concentration: 5 mM (3.48 mg/mL) | |||
| Bulk solution: DEPC water, 10vol% ethanol | |||
| Note: DODAP liposomes should be stored at 2-8 degree C at all times and used within one month. | |||
| F50105 | Cationic Liposomes DC-CHOL/DOPE | 2 | DC-CHOL/DOPE Cationic Liposomes |
| Lipid composition: DC-CHOL/DOPE (30:70 mol/mol) | |||
| Mean particle size: 80-100 nm | |||
| Lipid concentration: 5 mM (3.41 mg/mL) | |||
| Bulk solution: DEPC water, 10 vol% ethanol | |||
| F60103-P | Placebo Control for fluorescent DOPC/CHOL Liposomes | 1 | Placebo Control DOPC/CHOL Liposomes (100nm) |
| Lipid composition: DOPC/CHOL (55:45 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Dye: no dye | |||
| Mean particle size: 100 nm (85-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.5 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopen vials | |||
| F60103F-D | DOPC/CHOL Liposomes labeled with dansyl DOPE | 1 | Fluorescent DOPC/CHOL Liposomes Labeled with dansyl – DOPE (100nm) |
| Lipid composition: DOPC/CHOL/Dansyl – DOPE (54:45:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Dansyl DOPE: 0.5 mM (0.50 mg/mL) | |||
| Mean particle size: 100 nm (80-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.5 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials | |||
| F60103F-F | DOPC/CHOL Liposomes labeled with Fluorescein DHPE | 1 | Fluorescent DOPC/CHOL Liposomes labeled with Fluorescein DHPE (100nm) |
| Lipid composition: DOPC/CHOL/ Fluorscein -DHPE (54:45:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Fluorscein DHPE: 0.5 mM (0.59 mg/mL) (excitation/emission maxima ~496/519 nm) | |||
| Mean particle size: 100 nm (80-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.5 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60103F-MB | DOPC/CHOL Liposomes labeled with Marina Blue-DHPE | 1 | Fluorescent DOPC/CHOL Liposomes Labeled with Marina Blue – DHPE (100nm) |
| Lipid composition: DOPC/CHOL/MB-DHPE (54:45:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Marina Blue-DHPE: 0.5 mM (0.50 mg/mL) | |||
| Ex/Em~365/460 nm | |||
| Mean particle size: 100 nm (80-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.5 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60103F-NBD | DOPC/CHOL Liposomes Labeled with NBD-PE | 1 | Fluorescent DOPC/CHOL Liposomes Labeled with NBD – PE (100nm) |
| Lipid composition: DOPC/CHOL/NBD-PE (54:45:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| NBD – PE: 0.5 mM (0.50 mg/mL) | |||
| Ex/Em: ~463/536 nm | |||
| Mean particle size: 100 nm (80-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60103F-OG | DOPC/CHOL Liposomes labeled with Oregon Green 488 DHPE | 1 | Fluorescent DOPC/CHOL Liposomes labeled with Oregon Green® 488 DHPE (100nm) |
| Lipid composition: DOPC/CHOL/OG-DHPE (54:45:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Oregon Green 488 DHPE: 0.5 mM (0.54 mg/mL) | |||
| Ex/Em: ~496/524 nm | |||
| Mean particle size: 100 nm (85-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60103F-R | DOPC/CHOL Liposomes labeled with Rhodamine DHPE | 1 | Fluorescent DOPC/CHOL Liposomes labeled with Rhodamine DHPE (100nm) |
| Lipid composition: DSPC/CHOL/Rh-DHPE (54:45:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Rh-DHPE: 0.5mM (0.67mg/mL) | |||
| Ex/Em: ~560/580 nm | |||
| Mean particle size: 100 nm (85-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.5 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60103F-TC | DOPC/CHOL Liposomes labeled with TRITC-DHPE | 1 | Fluorescent DOPC/CHOL Liposomes Labeled withTRITC – DHPE (100nm) |
| Lipid composition: DOPC/CHOL/TC-DHPE (54:45:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| TRITC – DHPE: 0.5 mM (0.62 mg/mL) | |||
| Ex/Em: ~555/580 nm | |||
| Mean particle size: 100 nm (80-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.5 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60103F-TR | DOPC/CHOL Liposomes labeled with Texas Red DHPE | 1 | Fluorescent DOPC/CHOL Liposomes labeled with Texas Red® 488 DHPE (100nm) |
| Lipid composition: DOPC/CHOL/TR-DHPE (54:45:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Texas Red DHPE: 0.5 mM (0.54 mg/mL) | |||
| Ex/Em: ~595/615 nm | |||
| Mean particle size: 100 nm (85-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.5 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60103F-DI | DOPC/CHOL Liposomes labeled with DiI | 1 | Fluorescent DOPC/CHOL Liposomes labeled with Dil (100nm) |
| High quality LUV liposomes labeled with Dil are ready to use. The liposomes are prepared by the extrusion method to 100nm with very tight particle size distribution. The product is sterile filtered and filled in sterile vials guaranteed to be stable for 6 months when stored in refrigerator. | |||
| Lipid composition: DOPC/CHOL (54:45 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| DiI: 0.5mM (0.47mg/mL) | |||
| Mean particle size: 100 nm (90-120 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Shelf-life: 6 months guaranteed for unopened vials | |||
| F60103F-DA | DOPC/CHOL Liposomes labeled with DiA | 1 | Fluorescent DOPC/CHOL Liposomes labeled with DiA (100nm) |
| High quality LUV liposomes labeled with DiA are ready to use. The liposomes are prepared by the extrusion method to 100nm with very tight particle size distribution. The product is sterile filtered and filled in sterile vials guaranteed to be stable for 6 months when stored in refrigerator. | |||
| Lipid composition: DOPC/CHOL (54:45 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| DiA: 0.5mM (0.39mg/mL) | |||
| Mean particle size: 100 nm (90-120 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Shelf-life: 6 month for unopen vials | |||
| F60103F-DO | DOPC/CHOL Liposomes labeled with DiO | 1 | Fluorescent DOPC/CHOL Liposomes labeled with DiO (100nm) |
| The fluorescent control liposomes contain the green lipophilic dye DiO incorporated in the bilayers. It is used for tracking the cellular uptake of the liposomes by common methods like confocal, FACS, etc. | |||
| The green fluorescent, lipophilic carbocyanine DiOC18(3) is widely used as a lipophilic tracer. It is weakly fluorescent in water but highly fluorescent and quite photostable when incorporated into membranes. It has an extremely high extinction coefficient and short excited-state lifetimes (~1 nanosecond) in lipid environments. | |||
| Lipid composition: DOPC/CHOL (54:45 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Mean particle size: 100 nm (90-120 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Dye: 0.5 mM (0.44 mg/mL) | |||
| Stability: 6 months for unopened vials | |||
| Storage: 2-8 ºC | |||
| ‘DiO’; DiOC18(3) (3,3′-Dioctadecyloxacarbocyanine Perchlorate) (Invitrogen D-275) | |||
| Ex/Em: 484/501 nm | |||
| F60103F-DR-1 | DOPC/CHOL Liposomes labeled with DiR | 1 | Fluorescent DOPC/CHOL Liposomes labeled with DiR (100nm) |
| The fluorescent liposomes contain the lipophilic Near IR dye DiR incorporated in the bilayers. It is used for tracking the cellular uptake of the liposomes in vitro and in vivo by common methods like confocal, FACS, NIR imaging etc. The near IR fluorescent, lipophilic carbocyanine DiOC18(7) (“DiR”) is weakly fluorescent in water but highly fluorescent and quite photostable when incorporated into membranes. The sulfonate groups incorporated into this DiI analog improves water solubility. It has an extremely high extinction coefficient and short excited-state lifetimes (~1 nanosecond) in lipid environments. | |||
| Lipid composition: DOPC/CHOL (54:45 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Mean particle size: 100 nm (90-120 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| DiR: 0.5 mM (0.51mg/mL) | |||
| Stability: 6 months for unopened vials | |||
| Storage: 2-8 ºC | |||
| ‘DiR’; (Invitrogen D-12731) DiIC18(7) (1,1′-Dioctadecyl-3,3,3′,3′-Tetramethylindotricarbocyanine Iodide) | |||
| Ex/Em: 750/780 nm | |||
| F60103F-DD-1 | DOPC/CHOL Liposomes labeled with DiD | 1 | Fluorescent DOPC/CHOL Liposomes labeled with DiD (100nm) |
| The fluorescent control liposomes contain the lipophilic dye DiD incorporated in the bilayers. It is used for tracking the cellular uptake of the liposomes by common methods like confocal, FACS, etc. The far-red fluorescent, lipophilic carbocyanine DiD is a longer-wavelength DiI analog. It is an oil at room temperature and weakly fluorescent in water but highly fluorescent and quite photostable when incorporated into membranes. It has an extremely high extinction coefficient and short excited-state lifetimes (~1 nanosecond) in lipid environments. | |||
| Lipid composition: DOPC/CHOL (54:45 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Mean particle size: 100 nm (90-120 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| DiD: 0.5 mM (0.48mg/mL) | |||
| Stability: 6 months for unopened vials | |||
| Storage: 2-8 ºC | |||
| ‘DiD’; DiIC18(5) oil (1,1′-Dioctadecyl-3,3,3′,3′-Tetramethylindodicarbocyanine Perchlorate) (Invitrogen D-307) | |||
| Ex/Em: 644/665 nm | |||
| F60203F-D | DOPC/CHOL/mPEG-DSPE Liposomes Labeled with Dansyl DOPE | 1 | Fluorescent DOPC/CHOL Liposomes Labeled with dansyl – DOPE (100nm) |
| Lipid composition: DOPC/CHOL/mPEG2000-DSPE/Dansyl – DOPE (49:45:5:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Dansyl DOPE: 0.5 mM (0.50 mg/mL) | |||
| Ex/Em: ~ 336⁄517 nm | |||
| Mean particle size: 100 nm (80-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60203F-F | DOPC/CHOL/mPEG-DSPE Liposomes labeled with Fluorescein DHPE | 1 | DOPC/CHOL/mPEG-DSPE Liposomes labeled with Fluorescein DHPE (100nm) |
| Lipid composition: DOPC/CHOL/mPEG2000-DSPE/FITC-DHPE (49:45:5:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Fluorscein DHPE: 0.5mM (0.59 mg/mL) | |||
| Ex/Em: ~496/519 nm | |||
| Mean particle size: 100 nm (80-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.5 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60203F-MB | DOPC/CHOL/mPEG-DSPE Liposomes labeled with Marina Blue-DHPE | 1 | Fluorescent DOPC/CHOL/mPEG2000-DSPE Liposomes Labeled with Marina Blue – DHPE (100nm) |
| Product code: F60203F-MB | |||
| Lipid composition: DOPC/CHOL/mPEG2000-DSPE/MB-DHPE (49:45:5:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Marina Blue – DHPE: 0.5 mM (0.50 mg/mL) | |||
| Ex/Em: ~365/460 nm | |||
| Mean particle size: 100 nm (80-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60203F-NBD | DOPC/CHOL/mPEG-DSPE Liposomes Labeled with NBD-PE | 1 | Fluorescent DOPC/CHOL/mPEG2000-DSPE Liposomes Labeled with NBD – PE (100nm) |
| Product code: F60203F-NBD | |||
| Lipid composition: DOPC/CHOL/mPEG2000-DSPE/NBD-PE (49:45:5:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| NBD -PE: 0.5 mM (0.50 mg/mL) | |||
| Ex/Em: ~463/536 nm | |||
| Mean particle size: 100 nm (80-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60203F-OG | DOPC/CHOL/mPEG-DSPE Liposomes labeled with Oregon Green 488 DHPE | 1 | Fluorescent DOPC/CHOL/mPEG-DSPE Liposomes labeled with Oregon Green® 488 DHPE (100nm) |
| Lipid composition: DOPC/CHOL/mPEG-2000-DSPE/OG 488-DHPE (49:45:5:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Oregon Green 488 DHPE: 0.5mM (0.54 mg/mL) | |||
| Ex/Em: ~496/524 nm | |||
| Mean particle size: 100 nm (85-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60203F-R | DOPC/CHOL/mPEG2000-DSPE Liposomes labeled with Rhodamine DHPE | 1 | Fluorescent DOPC/CHOL/mPEG2000-DSPE Liposomes labeled with Rhodamine DHPE (100nm) |
| Lipid composition: DOPC/CHOL/mPEG2000-DSPE/Rh-DHPE (49:45:5:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Rhodamine -DHPE: 0.5 mM (0.67mg/mL) | |||
| Ex/Em: ~560/580 nm | |||
| Mean particle size: 100 nm (85-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60203F-TC | DOPC/CHOL/mPEG-DSPE Liposomes labeled with TRITC-DHPE | 1 | Fluorescent DOPC/CHOL/mPEG2000-DSPE Liposomes Labeled with TRITC – DHPE (100nm) |
| Lipid composition: DOPC/CHOL/mPEG2000-DSPE/TC-DHPE (49:45:5:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| TRITC – DHPE: 0.5 mM (0.62 mg/mL) | |||
| Ex/Em: ~555/580 nm | |||
| Mean particle size: 100 nm (80-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60203F-TR | DOPC/CHOL/mPEG-DSPE Liposomes labeled with Texas Red DHPE | 1 | Fluorescent DOPC/CHOL/mPEG-DSPE Liposomes labeled with Texa Red® 488 DHPE (100nm) |
| Lipid composition: DOPC/CHOL/mPEG2000-DSPE/TR-DHPE (49:45:5:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Texas Red DHPE: 0.5mM (0.54 mg/mL) | |||
| Ex/Em: ~595/615 nm | |||
| Mean particle size: 100 nm (85-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials, protect from light | |||
| F60203-P | Placebo Control DOPC/CHOL/PEG-DSPE Liposomes | 1 | Placebo Control DOPC/CHOL/PEG2000-DSPE Liposomes (100nm) |
| Lipid composition: DSPC/CHOL/PEG2000-DSPE (55:45 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Dye: no dye | |||
| Mean particle size: 100 nm (85-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Stability: 6 month for unopened vials | |||
| F60203F-DD | PEGylated DOPC/CHOL/mPEG-PE Liposomes labeled with DiD | 1 | Fluorescent DOPC/CHOL/mPEG-DSPE Liposomes labeled with DiD (100nm) |
| The fluorescent control liposomes contain the lipophilic dye DiD incorporated in the bilayers. It is used for tracking the cellular uptake of the liposomes by common methods like confocal, FACS, etc. The far-red fluorescent, lipophilic carbocyanine DiD is a longer-wavelength DiI analog. It is an oil at room temperature and weakly fluorescent in water but highly fluorescent and quite photostable when incorporated into membranes. It has an extremely high extinction coefficient and short excited-state lifetimes (~1 nanosecond) in lipid environments. | |||
| Lipid composition: DOPC/CHOL/mPEG-2000-DSPE (50:45:5 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Mean particle size: 100 nm (85-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| DiD: 0.5 mM (0.48mg/mL) | |||
| Stability: 6 months for unopened vials | |||
| Storage: 2-8 ºC | |||
| ‘DiD’; DiIC18(5) oil (1,1′-Dioctadecyl-3,3,3′,3′-Tetramethylindodicarbocyanine Perchlorate) (Invitrogen D-307) | |||
| Ex/Em: 644/665 nm | |||
| F60203F-DA | PEGylated DOPC/CHOL Liposomes labeled with DiA | 1 | Fluorescent DOPC/CHOL Liposomes labeled with DiA (100nm) |
| High quality LUV liposomes labeled with DiA are ready to use. The liposomes are prepared by the extrusion method to 100nm with very tight particle size distribution. The product is sterile filtered and filled in sterile vials guaranteed to be stable for 6 months when stored in refrigerator. | |||
| Lipid composition: DOPC/CHOL/mPEG-DSPE (50:45:5 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| DiA: 0.5mM (0.39mg/mL) | |||
| Mean particle size: 100 nm (85-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Shelf-life: 6 month for unopen vials | |||
| ‘DiA’; (Invitrogen D-3883) 4-Di-16-ASP (4-(4-(Dihexadecylamino)styryl)-N-Methylpyridinium Iodide) | |||
| Ex/Em: 456/590 nm | |||
| F60203F-DI | PEGylated DOPC/CHOL Liposomes labeled with DiI | 1 | Fluorescent DOPC/CHOL/mPEG-DSPE Liposomes labeled with Dil (100nm) |
| High quality LUV liposomes labeled with Dil are ready to use. The liposomes are prepared by the extrusion method to 100nm with very tight particle size distribution. The product is sterile filtered and filled in sterile vials guaranteed to be stable for 6 months when stored in refrigerator. | |||
| Lipid composition: DOPC/CHOL/mPEG2000-DSPE (50:45:5 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| DiI: 0.5mM (0.47mg/mL) | |||
| Mean particle size: 100 nm (85-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Shelf-life: 6 months guaranteed for unopened vials | |||
| DiI; DiIC18(3) (Invitrogen V22889) is a lipophilic membrane dye. It is weakly fluorescent until incorporated into liposome membranes. This orange—red-fluorescent dye, which is spectrally similar to tetramethylrhodamine, is often used as a long-term tracer for neuronal and other cells. | |||
| Ex/Em: 550nm/570nm | |||
| F60203F-DR | PEGylated DOPC/CHOL Liposomes labeled with DiR | 1 | Fluorescent DOPC/CHOL/mPEG-DSPE Liposomes labeled with DiR (100nm) |
| The fluorescent liposomes contain the lipophilic Near IR dye DiR incorporated in the bilayers. It is used for tracking the cellular uptake of the liposomes in vitro and in vivo by common methods like confocal, FACS, NIR imaging etc. The near IR fluorescent, lipophilic carbocyanine DiOC18(7) (“DiR”) is weakly fluorescent in water but highly fluorescent and quite photostable when incorporated into membranes. The sulfonate groups incorporated into this DiI analog improves water solubility. It has an extremely high extinction coefficient and short excited-state lifetimes (~1 nanosecond) in lipid environments. | |||
| Lipid composition: DOPC/CHOL/mPEG2000-DSPE (50:45:5 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Mean particle size: 100 nm (85-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| DiR: 0.5 mM (0.51mg/mL) | |||
| Stability: 6 months for unopened vials | |||
| Storage: 2-8 ºC | |||
| ‘DiR’; (Invitrogen D-12731) DiIC18(7) (1,1′-Dioctadecyl-3,3,3′,3′-Tetramethylindotricarbocyanine Iodide) | |||
| Ex/Em: 750/780 nm | |||
| F60203F-DO | PEGylated DOPC/CHOL Liposomes labeled with DiO | 1 | Fluorescent DOPC/CHOL Liposomes labeled with DiO (100nm) |
| The fluorescent liposomes contain the green lipophilic dye DiO incorporated in the bilayers. It is used for tracking the cellular uptake of the liposomes by common methods like confocal, FACS, etc. | |||
| The green fluorescent, lipophilic carbocyanine DiOC18(3) is widely used as a lipophilic tracer. It is weakly fluorescent in water but highly fluorescent and quite photostable when incorporated into membranes. It has an extremely high extinction coefficient and short excited-state lifetimes (~1 nanosecond) in lipid environments. | |||
| Lipid composition: DOPC/CHOL/mPEG2000-DSPE (50:45;5 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Mean particle size: 100 nm (85-110 nm) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Dye: 0.5 mM (0.44 mg/mL) | |||
| Stability: 6 months for unopened vials | |||
| Storage: 2-8 ºC | |||
| ‘DiO’; DiOC18(3) (3,3′-Dioctadecyloxacarbocyanine Perchlorate) (Invitrogen D-275) | |||
| Ex/Em: 484/501 nm | |||
| F60103F2-P | Placebo Control DOPC/CHOL Liposomes (200nm) for Fluorescent liposomes | 1 | Placebo Control DOPC/CHOL Liposomes (200nm) |
| Lipid composition: DOPC/CHOL (55:45 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Dye: no dye | |||
| Mean particle size: 230 nm (200-250 nm, intensity weighted lognormal per DSL) | |||
| Particle size distribution: 80-100nm (half-width) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.5 ± 0.2 | |||
| F60103F2-F | Fluorescent DOPC/CHOL Liposomes labeled with Fluorescein DHPE (200nm) | 1 | Fluorescent DOPC/CHOL Liposomes labeled with Fluorescein DHPE (200nm) |
| High quality LUV liposomes labeled with fluorescein DHPE are ready to use. The liposomes are prepared by the extrusion technology to 200-250nm nm with tight particle size distribution. The product is semisterile filtered through 0.45um filters and filled in autoclaved vials guaranteed to be stable for 3 months stored in refrigerator. The phospholipid, fluorescein DHPE is labeled on the head group with the green-fluorescent pH-sensitive fluorophore, fluorescein (excitation/emission maxima ~496/519 nm). | |||
| Lipid composition: DOPC/CHOL/Fluorescein-DHPE (54:45:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Fluorscein DHPE: 0.5 mM (0.59 mg/mL) | |||
| Mean particle size: 230 nm (200-250 nm, intensity weighted lognormal per DSL) | |||
| Particle size distribution: 80-100nm (half-width) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.5 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Shelf-life: 3 month for unopened vials, protect from light | |||
| F60103F2-R | Fluorescent DOPC/CHOL Liposomes labeled with Rhodamine DHPE (200nm) | 1 | Fluorescent DOPC/CHOL Liposomes labeled with Rhodamine DHPE (200nm) |
| High quality LUV liposomes labeled with Rhodamine DHPE (Rh-DHPE) are ready to use. The liposomes are prepared by extrusion to 200-250nm with tight particle size distribution. The product is sterile filtered through 0.45um filters and filled in sterile vials guaranteed for 3 months shelf-life properly stored in refrigerator. Rh–DHPE is a phospholipid labeled on the head group with the red-fluorescent rhodamine B fluorophore with excitation/emission maxima ~560/580 nm. For more information on the dye, see Invitrogen L-1392. | |||
| Specifications | |||
| Product code: F60103F2-R | |||
| Lipid composition: DOPC/CHOL/Rh-DHPE (54:45:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Rh-DHPE: 0.5mM (0.67mg/mL) | |||
| Mean particle size: 230 nm (200-250 nm, intensity weighted lognormal per DSL) | |||
| Particle size distribution: 80-100nm (half-width) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.5 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Shelf-life: 3 month for unopened vials, protect from light | |||
| F60103F2-TR | Fluorescent DOPC/CHOL Liposomes labeled with Texas Red® 488 DHPE (200nm) | 1 | Fluorescent DOPC/CHOL Liposomes labeled with Texas Red® 488 DHPE (200nm) |
| High quality LUV liposomes labeled with Texas Red® DHPE (TR-DHPE) are ready to use. The liposomes are prepared by the extrusion technology to 200-250nm with very tight particle size distribution. The product is sterile filtered through 0.45um and filled in sterile vials guaranteed to be stable for 3 months when stored in refrigerator. | |||
| The phospholipid, Texas Red® 1,2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine, triethylammonium salt (Texas Red® DHPE) is labeled on the head group with the bright, red-fluorescent Texas Red® dye (excitation/emission maxima ~595/615 nm). | |||
| Lipid composition: DOPC/CHOL/TR-DHPE (54:45:1 mol/mol) | |||
| Lipid concentration: 50 mM (50-55 mM) | |||
| Texas Red DHPE: 0.5 mM (0.54 mg/mL) | |||
| Mean particle size: 230 nm (200-250 nm, intensity weighted lognormal per DSL) | |||
| Particle size distribution: 80-100nm (half-width) | |||
| Hydration buffer: 10% sucrose, 20mM HEPES, pH 7.3 ± 0.2 | |||
| Storage: in refrigerator (2 – 8 degree C) | |||
| Shelf-life: 3 month for unopened vials, protect from light | |||
| F70101C-N-2 | Clophosome®, Clodronate Liposomes (Neutral) | 2 | Clophosome®, neutral clodronate liposomes, offers highly efficient in vivo macrophage depletion. Clodronate molecules are encapsulated in small MLV liposomes for superior activity, physical and chemical stability, and convenience of use. It is formulated to an exceptionally high clodronate/lipid ratio. Free clodronate is cleaned out and the liposomal clodronate encapsulation efficiency is more than 90%. Clophosome liposomes remain homogenous and suspended even after long term storage in fridge. It is not viscous and easy to inject. It is manufactured sterile for long term shelf-life. |
| The product is suitable for dosing with various routes including intravenous, intraperitoneal, subcutaneous, intranasal, intratracheal and etc. We have achieved 80-90% macrophage depletion in spleen (red pulp macrophages) 24 hours after a single 0.2 mL intravenous injection. A starting dose of 0.15 – 0.2 mL (i.v. or i.p.) for 20-25g animal body weight is recommended for good consistency in macrophage depletion. Optimization is recommended for your specific applications. | |||
| Active: clodronate disodium. CAS: 22560-50-5, 7 mg/mL | |||
| Lipid composition: phosphatidylcholine and cholesterol | |||
| Bulk solution: phosphate buffered saline (20mM sodium phosphate, 0.9% NaCl), pH 7.0-7.5 | |||
| Shelf-life: 6 months guaranteed for unopened vials, do not freeze | |||
| F70101C-N-10 | Clophosome®, Clodronate Liposomes (Neutral) | 10 | Clophosome®, neutral clodronate liposomes, offers highly efficient in vivo macrophage depletion. Clodronate molecules are encapsulated in small MLV liposomes for superior activity, physical and chemical stability, and convenience of use. It is formulated to an exceptionally high clodronate/lipid ratio. Free clodronate is cleaned out and the liposomal clodronate encapsulation efficiency is more than 90%. Clophosome liposomes remain homogenous and suspended even after long term storage in fridge. It is not viscous and easy to inject. It is manufactured sterile for long term shelf-life. |
| The product is suitable for dosing with various routes including intravenous, intraperitoneal, subcutaneous, intranasal, intratracheal and etc. We have achieved 80-90% macrophage depletion in spleen (red pulp macrophages) 24 hours after a single 0.2 mL intravenous injection. A starting dose of 0.15 – 0.2 mL (i.v. or i.p.) for 20-25g animal body weight is recommended for good consistency in macrophage depletion. Optimization is recommended for your specific applications. | |||
| Active: clodronate disodium. CAS: 22560-50-5, 7 mg/mL | |||
| Lipid composition: phosphatidylcholine and cholesterol | |||
| Bulk solution: phosphate buffered saline (20mM sodium phosphate, 0.9% NaCl), pH 7.0-7.5 | |||
| Shelf-life: 6 months guaranteed for unopened vials, do not freeze | |||
| F70101-N-2 | Plain Control Liposomes for Clophosome® (Neutral) | 2 | Plain Control Liposomes for Clophosome® (Neutral) |
| This product of empty liposomes are made to match the physical and chemical attributes of Clophosome® without the active clodronate encapsulated. It should be used as a negative control for macrophage depletion studies. | |||
| Lipid composition: phosphatidylcholine and cholesterol | |||
| Clodronate concentration: None | |||
| Bulk solution: phosphate buffered saline (20mM sodium phosphate, 0.9% NaCl), pH 7.0-7.5 | |||
| Storage and Stability: stable for 6 months when stored in refrigerator (2-8 degree C). | |||
| F70101-N-10 | Plain Control Liposomes for Clophosome® (Neutral) | 10 | Plain Control Liposomes for Clophosome® (Neutral) |
| This product of empty liposomes are made to match the physical and chemical attributes of Clophosome® without the active clodronate encapsulated. It should be used as a negative control for macrophage depletion studies. | |||
| Lipid composition: phosphatidylcholine and cholesterol | |||
| Clodronate concentration: None | |||
| Bulk solution: phosphate buffered saline (20mM sodium phosphate, 0.9% NaCl), pH 7.0-7.5 | |||
| Storage and Stability: stable for 6 months when stored in refrigerator (2-8 degree C). | |||
| F70101F-N-2 | Fluorescent Control Liposomes for Clophosome® (neutral) | 2 | Fluorescent Control Liposomes for Clophosome® (Neutral) |
| The fluorescent control liposomes contain the lipophilic dye Dil incorporated in the bilayers. It has comparable physical and chemical attributes as for the Clophosome® except no active is encapsulated inside. It is used for tracking the cellular uptake of the liposomes by common methods like confocal, FACS, etc. | |||
| Lipid composition: phosphatidylcholine and cholesterol | |||
| Dye: 0.15 mM (0.14mg/mL) | |||
| Stability: 6 months for unopened vials | |||
| F70101F-N-10 | Fluorescent Control Liposomes for Clophosome® (neutral) | 10 | Fluorescent Control Liposomes for Clophosome® (Neutral) |
| The fluorescent control liposomes contain the lipophilic dye Dil incorporated in the bilayers. It has comparable physical and chemical attributes as for the Clophosome® except no active is encapsulated inside. It is used for tracking the cellular uptake of the liposomes by common methods like confocal, FACS, etc. | |||
| Lipid composition: phosphatidylcholine and cholesterol | |||
| Dye: 0.15 mM (0.14mg/mL) | |||
| Stability: 6 months for unopened vials | |||
| F70101C-NC-2 | Combo: Clophosome®-N (neutral) and Control Liposomes | 2 | Combo: Clophosome® and Control Liposomes Combo (neutral) |
| This kit consists of the following items | |||
| 1 vial (2 or 10mL) of Clophosome® – clodronate liposomes (F70101C-N) | |||
| 1 vial (2 or 10mL) of control plain liposomes (F70101-N) | |||
| F70101C-NC-10 | Combo: Clophosome®-N (neutral) and Control Liposomes | 10 | Combo: Clophosome® and Control Liposomes Combo (neutral) |
| This kit consists of the following items | |||
| 1 vial (2 or 10mL) of Clophosome® – clodronate liposomes (F70101C-N) | |||
| 1 vial (2 or 10mL) of control plain liposomes (F70101-N) | |||
| F70101C-NF-2 | Combo: Clophosome®-N (neutrral), Fluorescent & Plain Control Liposomes | 2 | Combo: Clophosome® and the Fluorescent and Control Liposomes (Neutral) |
| This kit consists of the following items | |||
| 1 vial (2 or 10mL) of Clophosome® – clodronate liposomes (F70101C-N) | |||
| 1 vial (2 or 10mL) of fluorescent control liposomes (F70101N-F) | |||
| 1 vial (2 or 10mL) of control plain liposomes (F70101-N) | |||
| F70101C-NF-10 | Combo: Clophosome®-N (neutrral), Fluorescent & Plain Control Liposomes | 10 | Combo: Clophosome® and the Fluorescent and Control Liposomes (Neutral) |
| This kit consists of the following items | |||
| 1 vial (2 or 10mL) of Clophosome® – clodronate liposomes (F70101C-N) | |||
| 1 vial (2 or 10mL) of fluorescent control liposomes (F70101N-F) | |||
| 1 vial (2 or 10mL) of control plain liposomes (F70101-N) | |||
| F70101C-A-2 | Clophosome®-A – Clodronate Liposomes (Anionic) | 2 | Clophosome®-A- Clodronate Liposomes (Anionic) |
| Clophosome®-A, negatively-charged clodronate liposomes, offers superior efficiency of macrophage depletion. Clodronate molecules are encapsulated in LUV liposomes for superior activity, physical and chemical stability, and convenience of use. It is formulated to an exceptionally high clodronate/lipid ratio. Free clodronate is cleaned out and the liposomal encapsulation efficiency of clodronate is more than 90%. Clophosome liposomes remain homogenous even after long term storage in fridge. It is not viscous and easy to inject even with fine needles. It is manufactured sterile for long term shelf-life. | |||
| The product is suitable for dosing with various routes including intravenous, intraperitoneal, subcutaneous, intranasal, intratracheal and etc. We have achieved > 90% depletion in splenic macrophages (red pulp macrophages) 24 hours after a single 0.2 mL intravenous injection. A starting dose of 0.15-2 mL (i.v. or i.p.) for 20-25g animal body weight is recommended for good consistency in macrophage depletion. Optimization is recommended for specific applications. | |||
| Product name: Clophosome®-A | |||
| Active: clodronat disodium. CAS: 22560-50-5, 7 mg/mL | |||
| Lipid composition: phosphatidylglycerol, phosphatidylcholine and cholesterol | |||
| Bulk solution: phosphate buffered saline (20mM sodium phosphate, 0.9% NaCl), pH 7.0-7.5 | |||
| Shelf-life: 6 months for unopened vials, do not freeze | |||
| F70101C-A-10 | Clophosome®-A – Clodronate Liposomes (Anionic) | 10 | Clophosome®-A- Clodronate Liposomes (Anionic) |
| Clophosome®-A, negatively-charged clodronate liposomes, offers superior efficiency of macrophage depletion. Clodronate molecules are encapsulated in LUV liposomes for superior activity, physical and chemical stability, and convenience of use. It is formulated to an exceptionally high clodronate/lipid ratio. Free clodronate is cleaned out and the liposomal encapsulation efficiency of clodronate is more than 90%. Clophosome liposomes remain homogenous even after long term storage in fridge. It is not viscous and easy to inject even with fine needles. It is manufactured sterile for long term shelf-life. | |||
| The product is suitable for dosing with various routes including intravenous, intraperitoneal, subcutaneous, intranasal, intratracheal and etc. We have achieved > 90% depletion in splenic macrophages (red pulp macrophages) 24 hours after a single 0.2 mL intravenous injection. A starting dose of 0.15-2 mL (i.v. or i.p.) for 20-25g animal body weight is recommended for good consistency in macrophage depletion. Optimization is recommended for specific applications. | |||
| Product name: Clophosome®-A | |||
| Active: clodronat disodium. CAS: 22560-50-5, 7 mg/mL | |||
| Lipid composition: phosphatidylglycerol, phosphatidylcholine and cholesterol | |||
| Bulk solution: phosphate buffered saline (20mM sodium phosphate, 0.9% NaCl), pH 7.0-7.5 | |||
| Shelf-life: 6 months for unopened vials, do not freeze | |||
| F70101-A-2 | Plain Control Liposomes for Clophosome®-A (Anionic) | 2 | Plain Control Liposomes for Clophosome®-A (Anionic) |
| This product of empty liposomes are made to match the physical and chemical attributes of Clophosome®-A without the active clodronate encapsulated. It should be used as a negative control for macrophage depletion studies. | |||
| Lipid composition: phosphatidylcholine, phosphatidylglycerol and cholesterol | |||
| Clodronate concentration: None | |||
| Bulk solution: phosphate buffered saline (20mM sodium phosphate, 0.9% NaCl), pH 7.0-7.5 | |||
| Storage and Stability: stable for 6 months when stored in refrigerator (2-8 degree C) | |||
| F70101-A-10 | Plain Control Liposomes for Clophosome®-A (Anionic) | 10 | Plain Control Liposomes for Clophosome®-A (Anionic) |
| This product of empty liposomes are made to match the physical and chemical attributes of Clophosome®-A without the active clodronate encapsulated. It should be used as a negative control for macrophage depletion studies. | |||
| Lipid composition: phosphatidylcholine, phosphatidylglycerol and cholesterol | |||
| Clodronate concentration: None | |||
| Bulk solution: phosphate buffered saline (20mM sodium phosphate, 0.9% NaCl), pH 7.0-7.5 | |||
| Storage and Stability: stable for 6 months when stored in refrigerator (2-8 degree C) | |||
| F70101F-A-2 | Fluorescent Control Liposomes for Clophosome®-A (anionic) | 2 | Fluorescent Control Liposomes for Clophosome®-A (Anionic) |
| The fluorescent control liposomes contain the lipophilic dye Dil incorporated in the bilayers. It has comparable physical and chemical attributes as for the Clophosome® – A except no active is encapsulated inside. It is used for tracking the cellular uptake of the liposomes by common methods like confocal, FACS, etc. | |||
| Lipid composition: phosphatidylcholine, phosphatidylglycerol and cholesterol | |||
| Dye: 0.15 mM (0.14mg/mL) | |||
| Bulk solution: phosphate buffered saline (20mM sodium phosphate, 0.9% NaCl), pH 7.0-7.5 | |||
| Storage and Stability: stable for 6 months when stored in refrigerator (2-8 degree C) | |||
| F70101F-A-10 | Fluorescent Control Liposomes for Clophosome®-A (anionic) | 10 | Fluorescent Control Liposomes for Clophosome®-A (Anionic) |
| The fluorescent control liposomes contain the lipophilic dye Dil incorporated in the bilayers. It has comparable physical and chemical attributes as for the Clophosome® – A except no active is encapsulated inside. It is used for tracking the cellular uptake of the liposomes by common methods like confocal, FACS, etc. | |||
| Lipid composition: phosphatidylcholine, phosphatidylglycerol and cholesterol | |||
| Dye: 0.15 mM (0.14mg/mL) | |||
| Bulk solution: phosphate buffered saline (20mM sodium phosphate, 0.9% NaCl), pH 7.0-7.5 | |||
| Storage and Stability: stable for 6 months when stored in refrigerator (2-8 degree C) | |||
| F70101C-AC-2 | Combo: Clophosome®-A and Control Liposomes | 2 | Combo: Clophosome®-A and Control Liposomes |
| This kit consists of the following items | |||
| 1 vial (2 or 10mL) of Clophosome®-A – anionic clodronate liposomes (F70101C-A) | |||
| 1 vial (2 or 10mL) of control anionic liposomes (F70101-A) | |||
| F70101C-AC-10 | Combo: Clophosome®-A and Control Liposomes | 10 | Combo: Clophosome®-A and Control Liposomes |
| This kit consists of the following items | |||
| 1 vial (2 or 10mL) of Clophosome®-A – anionic clodronate liposomes (F70101C-A) | |||
| 1 vial (2 or 10mL) of control anionic liposomes (F70101-A) | |||
| F70101C-AF-2 | Clophosome®-A, Fluorescent & Plain Control Liposomes | 2 | Combo: Clophosome® – A, the Fluorescent liposomes and the Control Liposomes |
| This kit consists of the following items | |||
| 1 vial (2 or 10mL) of Clophosome® – clodronate liposomes (F70101C-A) | |||
| 1 vial (2 or 10mL) of fluorescent control liposomes (F70101F-A) | |||
| 1 vial (2 or 10mL) of control plain liposomes (F70101-A) | |||
| F70101C-AF-10 | Clophosome®-A, Fluorescent & Plain Control Liposomes | 10 | Combo: Clophosome® – A, the Fluorescent liposomes and the Control Liposomes |
| This kit consists of the following items | |||
| 1 vial (2 or 10mL) of Clophosome® – clodronate liposomes (F70101C-A) | |||
| 1 vial (2 or 10mL) of fluorescent control liposomes (F70101F-A) | |||
| 1 vial (2 or 10mL) of control plain liposomes (F70101-A) | |||
| F70101C-NA-2 | All-In-One Combo Kit: Clophosome®-A (anionic), Clophosome®-N (neutral) – And Control Liposomes for both | 2 | Combo: Clophosome® and Clophosome®-A And Control Liposomes |
| This all-in-one set is an excellent choice if you want to evaluate and compare the two clodronate liposome products. Included in this kit are one vial of each of the two clodronate liposomes and their plain control liposomes. | |||
| This kit consists of the following items | |||
| 1 vial (2 mL or 10 mL) of Clophosome® – clodronate liposomes (F70101C-N) | |||
| 1 vial (2 mL or 10 mL) of Clophosome®-A – Anionic clodronate liposomes (F70101C-A) | |||
| 1 vial (2 mL or 10 mL) of neutral control liposomes (F70101-N) | |||
| 1 vial (2 mL or 10 mL) of anionic control liposomes (F70101-A) | |||
| F70101C-NA-10 | All-In-One Combo Kit: Clophosome®-A (anionic), Clophosome®-N (neutral) – And Control Liposomes for both | 10 | Combo: Clophosome® and Clophosome®-A And Control Liposomes |
| This all-in-one set is an excellent choice if you want to evaluate and compare the two clodronate liposome products. Included in this kit are one vial of each of the two clodronate liposomes and their plain control liposomes. | |||
| This kit consists of the following items | |||
| 1 vial (2 mL or 10 mL) of Clophosome® – clodronate liposomes (F70101C-N) | |||
| 1 vial (2 mL or 10 mL) of Clophosome®-A – Anionic clodronate liposomes (F70101C-A) | |||
| 1 vial (2 mL or 10 mL) of neutral control liposomes (F70101-N) | |||
| 1 vial (2 mL or 10 mL) of anionic control liposomes (F70101-A) | |||
| F70101C-NH | High Potency Clophosome®- Clodronate Liposomes (Neutral, 1.0 mL, 20 mg/mL) | 1 | High Potency Clophosome®- Clodronate Liposomes (Neutral, 1.0 mL, 20 mg/mL) |
| Active: clodronate disodium. CAS: 22560-50-5 | |||
| Clodronate disodium: 20 mg/mL | |||
| Volume: 1.0mL | |||
| F70101-NH | Control empty liposomes for Clophosome® ,high potency (neutral) | 1 | Control liposomes for high potency Clophosome® (Neutral, 1.0 mL, 20 mg/mL) |
| Clodronate disodium: 20 mg/mL | |||
| Volume: 1.0mL | |||
| F70101C-AH | Clophosome® -A- high potency clodronate liposomes (anionic, 20mg/mL) | 1 | High Potency Clophosome®- A Clodronate Liposomes (Anionic, 1.0 mL, 20 mg/mL) |
| Active: clodronate disodium. CAS: 22560-50-5 | |||
| Clodronate disodium: 20 mg/mL | |||
| Volume: 1.0mL | |||
| F70101-AH | Control empty liposomes for Clophosome® – A, high potency (anionic) | 1 | Control liposomes for high potency Clophosome® – A (Anionic, 1.0 mL, 20 mg/mL) |
| Clodronate disodium: 20 mg/mL | |||
| Volume: 1.0mL | |||
| F70101C-NL | Lyophilized Clophosome® – Neutral Clodronate Liposomes | 5 | Lyophilized Clophosome® (neutral, 5mL) |
| Volume: 5.0mL post reconstitution | |||
| Active: clodronate disodium. CAS: 22560-50-5, 7mg/mL | |||
| Lipid composition: phosphatidylcholine and cholesterol | |||
| Form: Lyophilized cake/powder from 10% sucrose, 20mM Na phosphate, pH 7.0-7.5 | |||
| Shelf-life: 12 months for dry cake (guaranteed, replacement only) | |||
| Shelf-life: 3 months sterilely reconstituted (guaranteed, replacement only) | |||
| F70101-NL | Lyophilized control liposomes for Clophosome® (Neutral) | 5 | Control Liposomes for Lyophilized Clophosome® (neutral, 5mL) |
| Volume: 5.0mL post reconstitution | |||
| Lipid composition: phosphatidylcholine and cholesterol | |||
| Form: Lyophilized cake/powder from 10% sucrose, 20mM Na phosphate, pH 7.0-7.5 | |||
| Shelf-life: 12 months for dry cake (guaranteed, replacement only) | |||
| Shelf-life: 3 months sterilely reconstituted (guaranteed, replacement only) | |||
| F70101C-AL | Lyophilized Clophosome® -A – Anionic Clodronate Liposomes | 5 | Lyophilized Clophosome®-A (Anionic, 5mL) |
| Volume: 5.0mL post reconstitution | |||
| Active: clodronate disodium. CAS: 22560-50-5, 7mg/mL | |||
| Lipid composition: phosphatidylcholine, phosphotidyglycerol and cholesterol | |||
| Form: Lyophilized cake/powder from 10% sucrose, 20mM Na phosphate, pH 7.0-7.5 | |||
| Shelf-life: 12 months for dry cake (guaranteed, replacement only) | |||
| Shelf-life: 3 months sterilely reconstituted (guaranteed, replacement only) | |||
| F70101-AL | Lyophilized control liposomes for Clophosome® – A (Anionic) | 5 | Control Liposomes for Lyophilized Clophosome® – A (Anionic, 5mL) |
| Volume: 5.0mL post reconstitution | |||
| Lipid composition: phosphatidylcholine, phosphotidyglycerol and cholesterol | |||
| Form: Lyophilized cake/powder from 10% sucrose, 20mM Na phosphate, pH 7.0-7.5 | |||
| Shelf-life: 12 months for dry cake (guaranteed, replacement only) | |||
| Shelf-life: 3 months sterilely reconstituted (guaranteed, replacement only) | |||
| F1N5119 | Polycarbonate Membrane Filter (19mm, 0.05um) | 1 | Polycarbonate Membrane Filter (19mm, 0.05um) |
| This polycarbonate Track Etch (PCTE) membrane is ideally suited for use as the last extrusion membrane for making 75-85 nm liposomes. | |||
| Pore size (um): 0.05 | |||
| Size (mm): 19 | |||
| Pack Size: 100 | |||
| Color: white transluscent | |||
| Thickness: 25um | |||
| Minimum order: 5 boxes | |||
| F1N8119 | Polycarbonate Membrane Filter (19mm, 0.08um) | 1 | Polycarbonate Membrane Filter (19mm, 0.08um) |
| This polycarbonate Track Etch (PCTE) membrane is ideally suited for use as the last extrusion membrane for making 80nm liposomes. | |||
| Pore size (um): 0.08 | |||
| Size (mm): 19 | |||
| Pack Size: 100 | |||
| Color: white transluscent | |||
| Min order: 5 | |||
| F1N10119 | Polycarbonate Membrane Filter (19mm, 0.1um) | 1 | Polycarbonate Membrane Filter (19mm, 0.1um) |
| This polycarbonate Track Etch (PCTE) membrane is ideally suited for use as the last extrusion membrane for making 100-120 nm liposomes. | |||
| Pore size (um): 0.1 | |||
| Size (mm): 19 | |||
| Pack Size: 100 | |||
| Color: white transluscent | |||
| Min order: 5 | |||
| F1N20119 | Polycarbonate Membrane Filter (19mm, 0.2um) | 1 | Polycarbonate Membrane Filter (19mm, 0.2um) |
| This polycarbonate Track Etch (PCTE) membrane is ideally suited for use as the last extrusion membrane for making 200 nm liposomes or as an intermadiate membrane in a step-wise extrusion process. | |||
| Pore size (um): 0.2 | |||
| Size (mm): 19 | |||
| Pack Size: 100 | |||
| Color: white transluscent | |||
| Min order: 5 | |||
| F1N40119 | Polycarbonate Membrane Filter (25mm, 0.4um) | 1 | Polycarbonate Membrane Filter (25mm, 0.4um) |
| This polycarbonate Track Etch (PCTE) membrane is ideally suited for use as the last extrusion membrane for making 400 nm liposomes or as an intermadiate membrane in a step-wise extrusion process. | |||
| Pore size (um): 0.4 | |||
| Size (mm): 19 | |||
| Pack Size: 100 | |||
| Color: white transluscent | |||
| Min order: 5 | |||
| F1M10119 | Polycarbonate Membrane Filter (19mm, 1.0 um) | 1 | Polycarbonate Membrane Filter (19mm, 1.0 um) |
| This polycarbonate Track Etch (PCTE) membrane is ideally suited for use as the fisrt membrane in a step-wise extrusion process. | |||
| Pore size (um): 1.0 | |||
| Size (mm): 19 | |||
| Pack Size: 100 | |||
| Color: white transluscent | |||
| Min order: 5 | |||
| F1N5125 | Polycarbonate Membrane Filter (25mm, 0.05um) | 1 | Polycarbonate Membrane Filter (25mm, 0.05um) |
| This polycarbonate Track Etch (PCTE) membrane is ideally suited for use as the last extrusion membrane for making 75-90 nm liposomes. | |||
| Pore size (um): 0.05 | |||
| Size (mm): 25 | |||
| Pack Size: 100 | |||
| Color: white transluscent | |||
| Min order: 1 | |||
| F1N8125 | Polycarbonate Membrane Filter (25mm, 0.08um) | 1 | Polycarbonate Membrane Filter (25mm, 0.08um) |
| This polycarbonate Track Etch (PCTE) membrane is ideally suited for use as the last extrusion membrane for making 80-90nm liposomes. | |||
| Pore size (um): 0.08 | |||
| Size (mm): 25 | |||
| Pack Size: 100 | |||
| Color: white transluscent | |||
| Min order: 5 | |||
| F1N10125 | Polycarbonate Membrane Filter (25mm, 0.1um) | 1 | Polycarbonate Membrane Filter (25mm, 0.1um) |
| This polycarbonate Track Etch (PCTE) membrane is ideally suited for use as the last extrusion membrane for making 100-120 nm liposomes. | |||
| Pore size (um): 0.1 | |||
| Size (mm): 25 | |||
| Pack Size: 100 | |||
| Color: white transluscent | |||
| Min order: 5 | |||
| F1N20125 | Polycarbonate Membrane Filter (25mm, 0.2um) | 1 | Polycarbonate Membrane Filter (25mm, 0.2um) |
| This polycarbonate Track Etch (PCTE) membrane is ideally suited for use as the last extrusion membrane for making 200 nm liposomes or as an intermadiate membrane in a step-wise extrusion process. | |||
| Pore size (um): 0.2 | |||
| Size (mm): 25 | |||
| Pack Size: 100 | |||
| Color: white transluscent | |||
| Min order: 1 | |||
| F1N40125 | Polycarbonate Membrane Filter (25mm, 0.4um) | 1 | Polycarbonate Membrane Filter (25mm, 0.4um) |
| This polycarbonate Track Etch (PCTE) membrane is ideally suited for use as the last extrusion membrane for making 400 nm liposomes or as an intermadiate membrane in a step-wise extrusion process. | |||
| Pore size (um): 0.4 | |||
| Size (mm): 25 | |||
| Pack Size: 100 | |||
| Color: white transluscent | |||
| Min order: 1 | |||
| F1M10125 | Polycarbonate Membrane Filter (25mm, 1.0 um) | 1 | Polycarbonate Membrane Filter (25mm, 1.0 um) |
| This polycarbonate Track Etch (PCTE) membrane is ideally suited for use as the fisrt membrane in a step-wise extrusion process. | |||
| Pore size (um): 1.0 | |||
| Size (mm): 25 | |||
| Pack Size: 100 | |||
| Color: white transluscent | |||
| Min order: 1 |